|
|
 |
 |
| Treat your bed with TLC. |
Your owner's manual explains everything you need to know about assembling and caring for you
bed. But here are some quick tips that are also helpful.
Cleaning your Sleep Adjustment Bed
All of the fabric on your Sleep Adjustment Bed must be cleaned by a professional. Do not wash
them in a washing machine or dryer. Do not dry clean them.
To spot clean small areas—dab on sparkling water or a mild detergent. Blot firmly with a
clean cloth or sponge to remove the spot. Do not rub or scrub.
Moving your Sleep Adjustment Bed
Want to rearrange your bedroom? Move to a new
location? No problem. You can move your Sleep Adjustment Bed fully inflated or disassemble
it for easier transport. Just follow these instructions to protect it from damage.
Rearranging your bedroom furniture
- Unplug the air unit from the electrical outlet.
- Place the air unit securely on top of the bed.
- Be sure that all cords and hoses are off the floor and out of the way.
- Move your bed to the desired location in your bedroom.
- Plug the air unit back into the electrical outlet and store it as before, at the head of bed.
Moving to a new location
You can either move your bed fully inflated or
disassemble it for easier transport.
Moving your bed fully assembled
- Unplug the air unit from the electrical outlet.
- Locate the rubber stoppers you have stored in the quilted air unit bag.
- Remove the air hoses from the air unit—press the metal release valve at the end of each hose and pull gently to release them.
- Quickly cap off the air hoses using the rubber stoppers.
- You may now transport your bed.
- Reattach the air hoses to the air unit and plug the unit into the wall outlet.
- Some of the air may have escaped when you capped off the air hoses, so you may need to adjust the firmness of your Sleep Adjustment bed.
Disassembling your bed for moving
- Disconnect the air unit from the electrical outlet.
- Remove the hoses from the air unit—press the metal release valve on the end of each hose and pull gently to disengage.
- Deflate the air chambers—gently press to allow air to escape.
- Roll the chambers loosely, starting from the bottom and moving up, to release any additional air.
- Place the cover and foam in a protective bag to prevent stains.
- Pack all bed components in durable boxes for transport.
- After moving, follow the assembly instruction in your Owner's Manual to set up your bed.
|
|
